FIPA Service Hotline

00 800 - 22 553 472

Flow control valves

FIPA control valves with flow pins limit the volumetric flow and maintain the vacuum of the automation system by closing idle suction openings and reducing leakage loss. Control valves prevent you from having to adjust and retrace the path of the vacuum cup when gripping workpieces of different shapes by automatically shutting off idle vacuum cups. The vacuum system operates with very little leakage loss as a result.


FIPA control valves for handling air-permeable and porous workpieces (models 63.036 - 63.038 and 63.055) prevent accidental detachment due to residual leakage.


These self-cleaning control valves (models 63.013 and 63.015) are designed for use in dusty environments. Heavy-duty control valve models ensure stable operation even in rough environmental conditions. Self-cleaning takes place during the blow-off process.


FIPA seat and ball seat valves with flow pins and filters can be used for applications with short cycle times, low dust and dirt levels and low leakage. With the exception of model 63.003, suction power is set in the factory. In the case of 63.003, the suction power can be adjusted manually using a screw.


FIPA control valves without leakage loss are the right choice for handling non-porous workpieces. These control valves require the suction cup to be attached before the vacuum can be switched on.


Flow control valves with flow pin

For handling of porous products

  • Sealing of unused suction openings to maintain the system vacuum
  • Limited leakage prevents premature triggering with porous workpieces
  • Compact design
  • Optimal installation position is vertical

Technical data

Item no.63.03663.03763.03863.055
Suction power to achieve 30 % vacuum [Nl/min] 5 11 17 3
Suction power to achieve 60 % vacuum [Nl/min] 5 11 18 3
Max. flow rate with blow-off at 5 bar [Nl/min] 370 620 480 320
Flow pin bore hole diameter [mm] 0.8 1.2 1.5 0.6
Leakage loss [m³/h] 0.46 1.04 1.62 0.21
Weight [g] 8 8 8 8
Data Sheet Download datasheet Download datasheet Download datasheet Download datasheet
CADCAD downloadCAD downloadCAD downloadCAD download
Quote Quote Quote Quote Quote

+Dimensions

  • * = Flow direction
Item no.63.03663.03763.03863.055
G1G1/4G1/4G1/4G1/8
A [mm]23232316
B [mm]9995
SW17171717

Flow control valves with flow pin, self-cleaning

For harsh environmental conditions

  • Sealing of unused suction openings to maintain the system vacuum
  • Limited leakage prevents premature triggering with porous workpieces
  • Self-cleaning by blow-off
  • Suitable for harsh environmental conditions (Heavy-duty)
  • Optimal installation position is vertical

Technical data

Item no.63.01363.015
Suction power to achieve 30 % vacuum [Nl/min] 38 38
Suction power to achieve 60 % vacuum [Nl/min] 55 55
Max. flow rate with blow-off at 5 bar [Nl/min] 450 450
Weight [g] 10 8
Data Sheet Download datasheet Download datasheet
CAD--CAD download
Quote Quote Quote

+Notes

  • 63.015 can be plugged directly into a vacuum cup to conserve space

+Dimensions

BDD_63.013

63.013

BDD_63.015

63.015

  • * = Flow direction
Item no.63.01363.015
G1G1/4G1/4
d1 [mm]--9
d2 [mm]--14
A [mm]2529
B [mm]1011
C [mm]1014
D [mm]--2
SW1717

Flow control valves with flow pin and filter, low leakage loss

Inch thread

  • Sealing of unused suction openings to maintain the system vacuum
  • Ball seat valve with filter (not suitable for high levels of dust or dirt)
  • Suitable for short cycle times
  • Limited leakage prevents premature triggering with porous workpieces
  • Preset at the factory, 63.003 can be adjusted if necessary
  • Vertical mounting, exception of 63.001 to 63.003: Any mounting position

Technical data

Item no.63.00163.00263.01263.060
Suction power to achieve 30 % vacuum [Nl/min] 4 4 8 7
Suction power to achieve 60 % vacuum [Nl/min] 7 8 9 8
Max. flow rate with blow-off at 5 bar [Nl/min] 260 360 790 590
Weight [g] 15 24 49 10
Data Sheet Download datasheet Download datasheet Download datasheet Download datasheet
CADCAD download------
Quote Quote Quote Quote Quote

+Dimensions

BDD_63.003

63.001, 63.002

BDD_63.009

63.012, 63.060

  • a = Adjusting screw for 63.003
  • * = Flow direction
Item no.63.00163.00263.01263.060
G1G1/8G1/4G1/2R1/8
G2G1/8G1/4----
A [mm]48.5504139
B [mm]6101210
C [mm]----1412
SW14172722

Flow control valves with flow pin and filter, low leakage loss

  • Metric thread
  • Sealing of unused suction openings to maintain the system vacuum
  • Ball seat valve with filter (not suitable for high levels of dust or dirt)
  • Suitable for short cycle times
  • Low leakage prevents premature triggering with porous workpieces

Technical data

Item no.63.05863.059
Suction power to achieve 30 % vacuum [Nl/min] 1 1.5
Suction power to achieve 60 % vacuum [Nl/min] 1 1.5
Max. flow rate with blow-off at 5 bar [Nl/min] 80 100
Leakage loss [m³/h] 0.105 0.105
Weight [g] 6 12
Data Sheet Download datasheet Download datasheet
CAD----
Quote Quote Quote

+Dimensions

  • * = Flow direction
Item no.63.05863.059
G1M5M6
A [mm]19.928.1
B [mm]34
C [mm]4.54.9
SW1012

Flow control valves with flow pin, without leakage loss

  • Sealing of unused suction openings to maintain the system vacuum
  • No leakage loss, which means it is particularly well suited for dense workpieces
  • Closed valves are reset by switching off the vacuum
  • Can be mounted in any installation position

Technical data

Item no.63.01763.018
Suction power [Nl/min] 28.3 28.3
Min. vacuum level required [mbar] -250 -250
Data Sheet Download datasheet Download datasheet
CAD----
Quote Quote Quote

+Notes

  • These valves work only if the vacuum is switched on after the vacuum cup has been set in position

+Dimensions

  • * = Flow direction
Item no.63.01763.018
G1G1/8G1/4
G2G1/4G1/4
L [mm]4141
L1 [mm]1515
L2 [mm]99
SW1717