Vacuum lifters are superior to classic lifting devices with slings due to their faster and easier handling. Place the vacuum cup, press the manual slide valve and wait two to three seconds until the vacuum is generated. It is this easy to work with the vacuum lifter FIPA Spider!
The vacuum lifter FIPA Spider is a vacuum traverse that was developed with “plug & play” for use on a chain hoist.
Vacuum traverses, also called vacuum lifters in general, are used for handling plates, panes and sheets. Vacuum lifters are especially used in the wood, sheet metal and glass processing industries. They make the loading of processing machines and the storage of various goods much easier.
The FIPA Spider is available as standard for loads up to 250 and 500 kg. We can adapt the cross beam to your needs with a variety of accessories.
The modular construction makes it possible to develop special versions quickly and easily - we will be happy to consult you!
|Suitable admissible [kg]||250||500|
|Suction power at 50 Hz [m³/h]||5||5|
|Power supply at 50 Hz [V]||220-240||220-240|
|Rated power [kW]||0.12||0.12|
|Noise level at 50 Hz [dB(A)]||60||60|
|Vacuum reserves [l]||5.35||5.35|
|Number of vacuum cups||4||6|
|Connection thread vacuum cups||G1/2||G1/2|
The vacuum lifter satisfies DIN EN 13155
Single-phase electrical connection over the chain hoist (spiral cable is available as an accessory) - the FIPA Spider has a SCHUKO plug
The specified load values refer to the suction-tight surfaces. Suction trials must be implemented if the material is porous or rough. We can also implement the trials for you if requested.
If desired, the FIPA accessories can be installed in the factory when ordering a new FIPA Spider
|Länge gezogen [mm]||6,000|