Crane trolleys

The trolleys are the core of any crane installation and the lower the frictional running forces, the smoother the crane runs. On FIPA trolleys this is ensured by the use of high-performance ball bearings and lauramide rollers.

The reduced resistance results in reduced power consumption and quieter running.


Hinged trolleys are used to fix the crane bridge in the crane track by means of a crane carrier suspension.


Gabe trolleys serve to integrate the lifting equipment, such as our FIPALIFT vacuum tube lifters, into the crane installation.


Tandem trolleys are available both for crane bridges and for lifting equipment and will double the carrying capacity to 1,200 kg.

crane-trolley-crane-technology-fipa-500x320px

Hinge trolley

  • For fixing crane bridges to the crane track
  • Wheels made from high-performance polyamide for friction-free running
  • Body made from sturdy aluminium
  • Rubber buffers on both sides

Technical data

Item no.KT03.010
Load bearing capability [kg] 600
Weight [kg] 1.25
Data Sheet Download datasheet
CADCAD download
Quote Quote

Gab trolleys

  • For direct mounting of the lifting equipment, such as a tube lifter or chain hoist
  • Wheels made from high-performance polyamide for friction-free running
  • Body made from sturdy aluminium
  • Rubber buffers on both sides

Technical data

Item no.KT03.014KT03.015
Type Two rollers Four rollers
Load bearing capability [kg] 600 600
Weight [kg] 1.25 1.6
Data Sheet Download datasheet Download datasheet
CADCAD downloadCAD download
Quote Quote Quote

Tandem trolleys

  • Variants for crane bridges or lifting equipment
  • Double the carrying capacity
  • Wheels made from high-performance polyamide for friction-free running
  • Body made from sturdy aluminium
  • Rubber buffers on both sides

Technical data

Item no.KT03.021KT03.022KT03.023
Type Gab trolley Gab trolley Hinge trolley
Suitable for Lifting equipment Crane girder Crane girder
Load bearing capability [kg] 1,200 1,200 1,200
Weight [kg] 6 6.35 6.25
Data Sheet Download datasheet Download datasheet Download datasheet
CADCAD downloadCAD downloadCAD download
Quote Quote Quote Quote

Reduction in carriage pin to Ø 16 mm

Necessary for the use of FIPALIFT
  • Reduced carriage pin with Ø 16 mm
  • For example, required when using the FIPALIFT tube lifter

Technical data

Item no.KT03.046
Weight [kg] 0.114
Data Sheet Download datasheet
CAD--
Quote Quote