Vacuum lifter FIPA Spider

BWI_vakuumheber-vakuumtraverse-fipa-spider-1100x280px_en_Master

Vacuum lifters are superior to classic lifting devices with slings due to their faster and easier handling. Place the vacuum cup, press the manual slide valve and wait two to three seconds until the vacuum is generated. It is this easy to work with the vacuum lifter FIPA Spider!


The vacuum lifter FIPA Spider is a vacuum traverse that was developed with “plug & play” for use on a chain hoist.


Vacuum traverses, also called vacuum lifters in general, are used for handling plates, panes and sheets. Vacuum lifters are especially used in the wood, sheet metal and glass processing industries. They make the loading of processing machines and the storage of various goods much easier.


The FIPA Spider is available as standard for loads up to 250 and 500 kg. We can adapt the cross beam to your needs with a variety of accessories.

  • Fitting for the crane bulb for fastening the chain control on the operating handle
  • Signal lamp for optical warning in loud working environments
  • Hinge for a flexible control panel ensures an upright position, even at a low working height
  • Additional crossbars ensure a large suction area and improves the support of deformed materials
  • Variable selection of vacuum cups, depending on the application

The modular construction makes it possible to develop special versions quickly and easily - we will be happy to consult you!


FIPA also offers chain hoists and cranes that are compatible with our vacuum traverses. The competent FIPA team takes care of the complete system, from planning through to turnkey installation.


NEW

Vacuum lifter FIPA Spider

plug & play
  • Suitable for the horizontal handling of plates, sheets or panes
  • Easy to operate per manual slide valve, only one person required to safely lift the load
  • Easy to install: hang - plug in - done
  • Low dead weight through lightweight construction with aluminium
  • Loads up to 250 kg and 500 kg with suction-tight surfaces
  • The vacuum lifter is used on a chain hoist
  • The DT.5 vacuum pump is included with delivery
  • Using the ergonomic operating handle, the length of the control rod can be adjusted up to 2 m
  • Special versions can be produced to meet customer needs
  • The load is handled in a way that protects the material and avoids damage
  • Fast and efficient work through the omission of the fastening

Technical data

Item no.TR01.250-2000-2-1000TR01.500-2000-3-1000
Max. lifting force [lbs] 551.2 1,102.3
Suction power at 50 Hz [scfm] 2.9 2.9
Power supply at 50 Hz [V] 220-240 220-240
Rated power [kW] 0.12 0.12
Noise level at 50 Hz [dB(A)] 60 60
Safety tank volume of vacuum tank [l] 5.35 5.35
Number of suction cups 4 6
Connection thread suction cups G1/2 G1/2
Weight [lbs] 0 0
Data Sheet Download datasheet Download datasheet
CAD----
Quote Quote Quote

+Ordering notes

  • Please enter the desired length of the operating unit if needed (up to 2 m)
  • If desired, the FIPA accessories can be installed in the factory when a new order is placed
  • Vacuum cups are not included in the scope of delivery

+Notes

The vacuum lifter satisfies DIN EN 13155

Single-phase electrical connection over the chain hoist (spiral cable is available as an accessory) - the FIPA Spider has a SCHUKO plug

The specified load values refer to the suction-tight surfaces. Suction trials must be implemented if the material is porous or rough. We can also implement the trials for you if requested.

+Dimensions

+Operator control unit

The operator control unit is ergonomically shaped. We will adapt the length to your needs.

+Application example


NEW

Signal lamp

Safety feature
  • Additional warning device for safety for the vacuum lifter FIPA Spider
  • Signal flashes if the vacuum supply is too low
  • Ideal in especially loud work environments or when working with ear protection

Technical data

Item no.TR.ACC.0010
Typ of lamp LED
Data Sheet Download datasheet
CAD--
Quote Quote

+Ordering notes

If desired, the FIPA accessories can be installed in the factory when ordering a new FIPA Spider


NEW

Holder for chain hoist control

  • The fitting serves to fasten the chain host control on the operating handle

Technical data

Item no.TR.ACC.0015
Material Aluminum
Data Sheet Download datasheet
CAD--
Quote Quote

+Ordering notes

  • If desired, the FIPA accessories can be installed in the factory when ordering a new FIPA Spider

NEW

Cross beam retrofit

  • The number of vacuum cups on an existing FIPA Spider can be expanded with the module
  • Enlarges the suction area
  • Improves the support for deformed materials

Technical data

Item no.TR.ACC.0020
Length [mm] 980
Data Sheet Download datasheet
CAD--
Quote Quote

+Ordering notes

  • If desired, the FIPA accessories can be installed in the factory when ordering a new FIPA Spider
  • Vacuum cups are not included in the scope of delivery

NEW

Manual shut off valve

  • Individual vacuum cups are shut off with the manual shut off valve for changing plate sizes or parts with recesses

Technical data

Item no.TR.ACC.0025
Weight [oz] 4.62
Data Sheet Download datasheet
CAD--
Quote Quote

+Ordering notes

  • If desired, the FIPA accessories can be installed in the factory when ordering a new FIPA Spider

+Notes

  • The load diminishes when individual vacuum cups are shut off. The operator is responsible for ensuring that the load corresponds to the holding force of the remaining suction area.
  • The operator must ensure that the manual shut off valves are opened again when they are no longer being used

NEW

Spiral cable

  • The spiral cable serves to offset the electrical energy from the chain hoist

Technical data

Item no.TR.ACC.0030
Length [mm] 3,000
Length [mm] 1,500
Length [mm] 6,000
Data Sheet Download datasheet
CAD--
Quote Quote

+Notes

  • Cable type: PUR 3G 1.5 black
  • Cable end 1: screwed SCHUKO plug made of solid rubber
  • Cable end 2: 400 mm bare end

NEW

Hinge for handle

  • Stable hinge so that the rod on the operating component can be swivelled up or down
  • The position is chosen at will
  • Compatible with FIPA XLine extrusions
  • Makes an upright position possible, even at low working heights

Technical data

Item no.TR.ACC.0040
Pivoting range [°] 45
Data Sheet Download datasheet
CAD--
Quote Quote

+Ordering notes

  • If desired, the FIPA accessories can be installed in the factory when ordering a new FIPA Spider

+Application example