EN

Select your language and country

You are in our store for

We realized that you are actually from . However, you are currently on our store for US. On this store, orders can only be delivered to US. Would you like to switch to the store for ?

Series 840 – power grippers with stroke, clamping diameter 30 mm

  • Grippers with high gripping force and narrow closing gap for flat sprues
  • Feed stroke (cylinder 1) moves gripper towards the mold for part removal
  • Back stroke (cylinder 2) fully retracts gripper to enable undisturbed part release, e.g. on a conveyor belt
  • Grippers are self-centering
  • Medium: filtered and oiled/unoiled air
  • Suitable for heavy-duty applications due to closed, coaxial cylinder guiding
  • Part control via large area sensor activation, regardless of sprue position (GR04.140B, GR04.140B/NPN)
  • Detection of stroke via optional cylinder sensors
  • Easy exchange of jaws without snap-rings
  • If required, the grippers can quickly be changed over to non-self-centering
  • Included in scope of delivery of GR04.840B: sensor GR04.131-S1, resp. GR04.131-S2, cable 0.2 m, 3-pin M8 male connector, free end; extension cable 2 m, 3-pin M8 male connector, free end
  • Please refer to "suitable sensors" for cylinder sensors
  • Grippers with high gripping force and narrow closing gap for flat sprues
  • Feed stroke (cylinder 1) moves gripper towards the mold for part removal
  • Back stroke (cylinder 2) fully retracts gripper to enable undisturbed part release, e.g. on a conveyor belt
  • Grippers are self-centering
  • Medium: filtered and oiled/unoiled air
  • Suitable for heavy-duty applications due to closed, coaxial cylinder guiding
  • Part control via large area sensor activation, regardless of sprue position (GR04.140B, GR04.140B/NPN)
  • Detection of stroke via optional cylinder sensors
  • Easy exchange of jaws without snap-rings
  • If required, the grippers can quickly be changed over to non-self-centering
  • Included in scope of delivery of GR04.840B: sensor GR04.131-S1, resp. GR04.131-S2, cable 0.2 m, 3-pin M8 male connector, free end; extension cable 2 m, 3-pin M8 male connector, free end
  • Please refer to "suitable sensors" for cylinder sensors

Your Cart

Please login

Please login to see everything in your cart